Industrial vehicles spare parts & automotive industry

To request a window or windshield, you must have your vehicle’s VIN number and provide the following information about your vehicle:

-Brand

-Model

-Year of registration

In order to identify the correct spare part it is necessary to have the following data:

-Vehicle brand and model

-Year of registration

-Frame number

The alternative fenders to the original are of equivalent quality, but absolutely cheaper price; in fact you can save even 60% and more compared to the original fender.

In order to locate the correct replacement for your bumper, equip yourself with the following information:

-Vehicle brand and model

-Year of registration

-Frame number

This type of spare part is very bulky, for this reason often the cost of transport is not negligible.

There are many types of mirrors in the truck. In particular, there are:

-Rearview mirrors

-Wide angle mirrors

-Wheel mirrors

-Mirrors to observe the situation under the windshield

air filters

oil filters

fuel filters

drying filters

cockpit filters

Water pumps

Oil pumps

Diesel pumps

The company stocks more than 100 different references, as well as many others on order.

 The turbine is composed of two parts: the so-called “hot” side in contact with the exhaust gases, and the “cold” side where the turbine draws in the air to be compressed and introduced into the engine. 

 The coupling bars are fundamental spare parts for the safety of both trucks and buses. 

The longitudinal tie rod is the first linkage element that starts from the steering box and joins the steering box to the steering column transmission.

Steering heads are joints that are used in transverse tie rods and coupling bars to transmit force to the various components and compensate for movement. 

There are different types of eyes:

-Flanged eyes, equipped with a flange to be fixed with screws to the towed vehicle

-Drawable eyes, which are attached to the rudder using a nut

-Eyes to be welded

 We sells brake discs of different brands . At our warehouse is available the whole range of tie rods for industrial vehicles. 

Brake pads are the wear material that, pushed by the brake caliper towards the brake disc, creates friction with it and slows down the rotational motion of the wheels.

The drum consists of a rotating cylinder integral with the mechanical part to be braked.

The key pins  are mechanical devices that, put into rotation by the brake levers, allow to expand the brake shoes and push the brake shoes in contact with the drum: in this way the vehicle can brake. 

The family of shock absorbers covers the following needs:

-Cab shock absorbers

-Shock absorbers for tractor and trailer axles

-Shock absorbers for seats

-Gas springs for opening hoods, hatches and other special applications

The leaf springs are built with more steel leaves of different lengths. They are stacked one on top of the other and held together by metal staples. The main leaf spring is held integral to the frame by a silentblock, which allows oscillation. In addition, the various leaf springs can be supplemented by additional sheets called “auxiliary sheets” or “leaf springs”.

The silent block is a bushing that has a cavity between the inner and outer surface made of rubber. If used inside coupling bars, reaction bars or leaf spring leaves, it has the characteristic of dampening friction and stress between the various mechanical components. Like all devices composed of rubber, it is subject to wear over time.

We have more than 250 references of air suspensions for industrial vehicles in stock, both membranes and complete. Air suspensions are operated by compressed air; they are often adjustable, in fact, by acting on the air pressure adjustments it is possible to alter the behavior of the suspension, making it more rigid or more flexible.

The need for electric power in the industrial vehicle is increasingly high. The number of users is continuously increasing (both for the operation of the vehicle and for the comfort in the cabin). For this reason, the trend among manufacturers is to manufacture increasingly powerful alternators to meet the needs of new batteries and truck loads.

The need for electric power in the industrial vehicle is increasingly high. The number of users is continuously increasing (both for the operation of the vehicle and for the comfort in the cabin). For this reason, the trend among manufacturers is to manufacture increasingly powerful alternators to meet the needs of new batteries and truck loads.

In our warehouse are managed more than 80 different references related to starter motors for trucks. Many more are available on order. The typical problems related to the starter motor are the wear of the pinion, its non-return or return, the short circuit. The tendency of truck starter manufacturers is to make them increasingly compact for obvious gains in weight and bulk. 

It is essential, when choosing a headlamp as well as a fog lamp, that the spare part is of high quality. A well-made spare part guarantees a considerably higher degree of visibility, with a consequent increase in vision and therefore in safety.The typical problems of the headlights concern above all the condensation inside and the yellowing of the transparent or of the parabola.

The brake cylinders receive air from the compressed air system and transform the pneumatic energy into mechanical energy, acting on the key pins (by means of the brake lever in the case of systems with drum brakes) or directly on the brake caliper (in the case of systems with disc brakes).

Compressors are the devices that allow the pneumatic system to work; they take motion from the drive shaft, and are lubricated by the same oil, generating the pressure necessary to operate the braking system, the sound system, or services such as power take-offs, the compressed air utility inside the truck.

Overhaul kits typically include the seals and metal parts that wear the most on major pneumatic valves. 

Most clutches are pneumatically actuated, while some clutches (especially those assisting the latest generations of trucks) can be electrically assisted.

Avrasya sells different types of accessories for trailers and tractors, including toolboxes to be fixed under the loading platforms. The boxes are classified according to the construction material:

-Galvanized sheet metal

-Stainless Steel

-Plastic

All three types are designed to prevent water infiltration.

Snow chains are applied on the towing wheels; a set of chains consists of components that are used in one axle, therefore it completes two wheels.

In order to choose the correct chain, it is necessary to provide the size of the tire, and in some cases also its brand, since there are construction variants of chains dedicated to specific tire brands or models.

Load-securing belts are essential for securing the load during travel, thereby increasing driving safety and safeguarding the load itself. Both the overall spare parts consisting of ratchet and belt and the individual elements are available.

The towing hook is a static mechanical device, typically used for trailers, which can be mounted in a way that is integral with the frame of a truck so that a trailer can be joined to the towing vehicle.